How to Refill Your Vape with Elux Liquid: Step-by-Step Guide

Vape enthusiasts go with the new market trends and convenience, and they know how a Nic Salt liquid gives them cost-effective and longer vaping without frequent replacements. You just need to refill the tank with your favourite Nic Salt brand flavour and continue vaping. Here, Elux Nic Salts Liquid is the most popular Nic Salt brand in the UK market that replicates the signature Elux flavours in a refillable format. It is very important to know which product is compatible with nic salts, how to refill your vape with Elux Liquid, and how to get the best use from it. So in this blog, you will know the process step by step, from preparing your kit to dealing with problems that arise after refilling.

What You Need Before Refilling Your Vape with Elux Liquid?

Elux Nic Salts come in a 10ml bottle with a 50/50 PG/VG blend and 10mg or 20mg nicotine strength, are TPD compliant, and deliver a satisfying and smooth experience.

Before you begin to refill your vape with Elux Liquid, prepare your vape kit and Elux Nic Salts bottle. You will need:

• A refillable vape kit: Use a compatible vape with a refillable pod or tank that accepts nic salt liquid.

• Elux Nic Salts: Choose a liquid or flavour with the right nicotine strength that suits your needs.

• Tissue or a clean cloth: Keep this nearby to wipe away small spills and clean the outside of the pod.

Work on a clean, flat surface where you can handle the bottle and pod comfortably. This makes the process easier and reduces the chance of spilling liquid.

Is Elux Liquid Compatible with Every Vape?

Elux Nic Salts are not suitable for every type of vape. Its 50/50 PG/VG blend is only compatible with low-wattage, refillable starter kits and MTL vapes.

Which Vape Kits Work Best with Elux Nic Salts?

Elux Nic Salts come with a 50/50 VG/PG blend that is suitable for many low-powered refillable pod kits. These vapes produce a mouth-to-lung draw, where vapour is first drawn into the mouth before being inhaled.

The liquid is available in different nicotine strengths: 10 mg and 20mg options. Choose a strength that suits your needs and satisfies your cravings instantly.

Why You Should Check Your Vape Before Refilling

Refillable pods have a designated opening that allows you to add liquid, and sealed prefilled pods only need replacement when empty. These two systems work differently.

If your vape uses sealed prefilled pods, do not attempt to open or refill them. Always use a refillable vape for Nic Salts. A nic salt liquid is not for high-powered sub-ohm vapes.

Refill Your Vape with Elux Liquid: Step-by-Step Instructions

When you have a compatible refillable vape kit and your Elux Nic Salts bottle ready, follow these steps to fill the pod correctly.

Step 1: Prepare Your Vape Kit

Switch off your vape if it has a power button. Locate the filling part; some vapes have a top refill design that is very easy to refill.

Step 2: Open the Elux Nic Salts Bottle

Elux Nic Salts bottles use child-resistant caps. To open one, press the cap down and turn it anti-clockwise.

Remove the cap and check that the bottle's seal is intact before its first use. Keep the nozzle clean and don’t touch it against surfaces that could contaminate the liquid.

Handle nicotine liquid carefully and keep it away from children and pets.

Step 3: Locate the Pod's Filling Port

Find the opening for adding liquid. Its position varies with vapes, so identify the design before squeezing the bottle.

• Top-fill pods

• Side-fill pods

• Bottom-fill pods

These are the main designs; just check the refilling tank or pod and clean it before refilling with the other liquid.

Step 4: Fill the Pod with Elux Liquid

Place the bottle nozzle into the filling port and fill it gently. Add the liquid slowly so you can control the amount and avoid spills.

Do not fill the pod beyond its maximum fill line. If there is no visible line, leave some space and don’t fill it to the brim. Also, don’t get liquid into the airflow channel because this can lead to gurgling or leakage.

When you have added liquid, remove the nozzle carefully and wipe away any liquid around the opening.

Step 5: Close the Filling Port Securely

Close the filling port securely. Make sure the seal sits flat, and the opening is fully closed.

If the stopper is loose, damaged, or does not fit properly, liquid can escape during use.

Step 6: Allow the Coil to Saturate Before Vaping

When it is filled, the liquid needs time to soak into the coil's wick. This is important when adding liquid.

Allow the liquid to absorb for 5–10 minutes. Vaping before the wick has absorbed enough liquid can produce a burnt taste and damage the coil. So it's best to give it some time to saturate the coil and get a consistent experience.

Common Mistakes to Avoid When Refilling Your Vape with Elux Liquid

A few errors can affect how your vape performs after refilling. Avoid these common mistakes:

• Overfilling the pod: Too much liquid can escape through the filling area or enter the airflow channel. Also, it needs frequent maintenance and cleaning.

• Using the wrong opening: Filling through the airflow chimney instead of the designated port can cause gurgling and leaks.

• Choosing an unsuitable Vape: High-powered and sub-ohm vapes are not appropriate for nic salt liquids. Always choose compatible vapes.

• Vaping too soon: A coil that has not absorbed enough liquid causes a burnt taste.

What to Do If Your Vape Leaks or Tastes Burnt After Refilling?

Problems after refilling do not always mean that the liquid is unsuitable. The filling method, condition of the pod, and state of the coil can all affect performance.

Why Is My Vape Leaking After Refilling?

Don't overfill the pod to avoid leaks. Clean up any spills and check for cracks or loose seals. Correct the issue before using the vape again. Replace a damaged pod rather than trying to seal it with glue or other materials.

Why Does My Vape Taste Burnt After Refilling?

A burnt taste means that the wick has not absorbed enough liquid. It can also indicate that the coil is worn or that the liquid is not suitable for the vape.

If the taste occurs immediately after filling, stop vaping and allow additional time for the wick to absorb the liquid. If the burnt taste continues, check the coil and pod for wear, and replace them if needed. Do not continue using a coil that produces a persistent burnt taste.

How to Store Elux Nic Salts After Opening?

When you refill the vape with Elux Liquid, the remaining liquid bottle needs proper storage.

• Close the cap tightly after every use to prevent spills and limit exposure to air.

• Store the bottle upright in a moderate temperature and keep it out of direct sunlight and away from heat.

• Keep nicotine liquid out of reach of children and pets.

If nicotine liquid spills onto your skin, wash the affected area thoroughly with soap and water. Keep the bottle away from food and drink to avoid accidental exposure.

Conclusion

When you first refill your vape with Elux Vape Liquid, you need to follow these steps: prepare a compatible pod, locate the correct filling port, add the liquid slowly, close the opening securely, and give it some time so that the coil absorbs the liquid before vaping. Make sure you don’t overfill the pod, and maintain it in good condition to prevent leaks and poor performance.

Explore the Elux Nic Salts range at Vapes Market Wholesale with available wholesale deals in the UK.