How to fix Hayati Pro Max that is not working - An in-Depth Guide

Most vape brands design vaping products for single use. This means you need to discard them when the vape juice is no longer available in the vape or the battery runs out. The Hayati Pro Max 4000 box of 10 is just like that. In addition, this disposable vape works perfectly from beginning to end. But it is quite surprising if your Hayati Pro Max is not working as it should. Whether it’s a power issue or a lack of vapour, you have no idea what to do if something goes wrong. Take a deep breath. We’re here to help you. Fixing this vape is very easy if you follow the right steps. Here, we’ll identify common problems that you may face and provide easy steps on how to fix Hayati Pro Max. We advise you to follow them to solve the issue and get your vape back in action.

Common reasons why a brand new Hayati Pro Max is not working

If your brand new Hayati Pro Max is not working, there are several reasons. In this section, we’ll see some common problems and also solutions. These steps will help you to fix Hayati Pro Max.

1. The battery is dead

A battery is the main feature that provides power to the vape to produce vapour. When you take a puff right after unboxing, and your brand-new vape never starts working, it means never producing any vapour. It might be that the battery is empty. It’s a very rare problem. 

Sometimes, it happens due to improper charging or a damaged battery. In that case, you return it where you bought it. This is because the Hayati Pro Max is a pre-charged vape. This means you can’t recharge it. Therefore, the best solution is to replace your vape with a new one as soon as possible.

2. Faulty Vape

If you don’t get any vapour when you take your first puff, check your vape. If it isn’t turned on, it might be that its auto-inhaling mechanism is damaged or that you received a faulty vape. You can’t fix this problem. 

In addition, if your Hayati Pro Max doesn’t work right after unboxing, you should return it to the place you acquired it from and ask for compensation or replacement. To avoid this issue, you must buy your vape goods from a trustworthy supplier that sells original, high-quality vapes.

3. Covered Airflow

When you hit your disposable vape or struggle to take a puff, the airflow holes may be covered. They are located at the bottom of the vape body. The manufacturer covered them with a protective seal so that dust did not enter or block the passage. This is the most common problem, but you can fix it by just removing the seal. Moreover, you must make sure one or two little slots at the bottom of the casing are clear so the air can enter the vape when you inhale.

4. The vape juice is leaked

The Hayati Pro Max 4000 box of 10 comes with a specific amount of e-liquid, more than enough to enjoy almost 4000 puffs. When you receive your vape, you see it is covered in liquid. This means your vape leaked inside the box, which sometimes happens due to improper packaging. 

Moreover, it is one of the main reasons why your Hayati Pro Max is not working. It happens very rarely. All Hayati vapes come with proper packaging. Moreover, the manufacturer confirms that you acquired your vape in good condition. To fix Hayati Pro Max, you should return it and ask the supplier to change it.

Used Disposable Not Working? Here’s What to Do

If your Hayati Pro Max 4000 disposable vape stops working in the middle, don’t panic. Now, you’ll know how to fix Hayati Pro Max when it stops hitting.

• Coil Problem

If you take a puff, you receive a burnt taste or dry hits, which makes your vaping time unpleasant. This is the most common issue, but you can easily fix it. To fix Hayati Pro Max, you must check the coil. The coil degrades over time and delivers unpleasant hits. To solve this problem, you need to replace your vape or change the coil if possible.

• Blocked Airflow Holes

If your Hayati Pro Max 4000 is not functioning correctly, you must check the battery, e-liquid tank, or mouthpiece. If everything is working properly, it might be that the airflow holes are blocked. Sometimes, the dust particles block the airflow passage and cause no vapour. Therefore, you must make sure that you clean it properly before starting your puffing session. It needs to be open, not blocked. To fix Hayati Pro Max, you should clean the airflow passage with a soft brush, cotton, or a piece of tissue. We advise you to do it carefully and avoid damaging other parts. Cleaning the blockage can usually improve the vape’s working and restore it to full functionality.

• Avoid Overheating

Never leave your disposable vape in direct sunlight. Extreme cold or hot atmospheres damage the vape’s battery or internal parts, so you must avoid them. Overheating is one of the main reasons your used disposable vape stops working.

• Improper usage

Sometimes, improper usage can cause poor performance. For example, taking longer puffs or using the vape constantly can affect its performance and cause coil degradation. We advise you to take shorter puffs and avoid using your vape without any break. Taking breaks between sessions or puffs gives enough time for the coil to cool down and reabsorb the vape liquid properly.

• Check E-liquid Tank

If your Hayati disposable vape stops producing vapour or you feel unsatisfied or thin vapour, you must check the e-liquid level. If the e-liquid amount is low or nearing its end, then it means you need to change your vaporiser. Simply dispose of it and try a new one. Low or empty cartridges can cause malfunction.

In addition, storing the vapes in the wrong area can also cause e-liquid leakage, dryness, reduced life, or inconsistent performance. Therefore, you must keep your e-cig in a clean, dry, or cool place so that you can enjoy your favourite flavour without any issues.

• Check battery level

If you’ve checked the e-liquid and there is enough available in the vape tank to provide puffs, then check the battery level. It is designed to last until the 4000 puffs. But when you take longer or harden puffs and use it continually, it uses more battery and e-liquid. As a result, you need to replace it frequently. Moreover, it’s a non-rechargeable vape; dispose of it properly at an electronics recycling drop-off, just like other battery-powered modules.

When to Get Expert Assistance

If you’ve followed all the troubleshooting steps and your issues persist, it’s time to get expert advice. Contact the customer support team to fix Hayati Pro Max. Furthermore, you must provide them with detailed information about the problem through email or the original website. You also mention when this issue arises and what you do to resolve it. They will tell you what to do in this situation and how to replace your vape without losing money. The authentic supplier provides warranties, so don’t hesitate to reach out.

Conclusion

The Hayati Pro Max 4000 box of 10 is the most reliable and convenient vaping product. But it might be possible you may face some issues. If your Hayati vape is not working, don’t worry. It is very easy to identify the problem and fix Hayati Pro Max. By following the steps we mentioned above, you can determine the problem and take the steps needed to resolve it. Moreover, if you want to buy to avoid these issues, be sure you choose an authentic supplier.