How Do You Set Up the Hayati Pro Ultra Plus 25000 for the First Time?

The Hayati Pro Ultra Plus 25000 box of 5 is a strong vape that lasts a long time. It gives you 25000 puffs before you need a new pod. 

This vape has a dual tank system with two 10ml auto-refill containers and two 2ml prefilled pods. You do not need to pour e-liquid yourself. The vape works by just inhaling, no buttons to press. 

As a matter of fact, it also has a twist mouthpiece that lets you switch between two flavours. Setting it up for the first time is easy, but you must do it right. Also, a bad setup can even lead to weak taste or burnt hits. This blog walks you through every step.

What’s in the Box?

Open the package and check your items. Inside, you get one Hayati Pro Ultra Plus 25000 box of 5. It already has the battery attached. You also receive two 10ml auto-refill containers, which hold the e-liquid. 

There are two 2ml prefilled pods with mesh coils. One user manual is included, so read it carefully and quickly. Do not throw away the box until you finish setting up. 

Step One – Remove All Stickers and Bungs

The vape comes with protective pieces. Look for small rubber bungs on the pods and pull them out gently. Check the bottom of the vape for any plastic covers. Some stickers block air holes, so just peel those off completely. 

If you leave any bungs in place, the liquid cannot flow, which gives you dry hits. Also, the auto-refill system will not work. So take your time and inspect the mouthpiece area too. Sometimes a thin film covers the tip. Remove it and now the vape is ready for the next step.

Step Two – Insert the Refill Containers Correctly

The Hayati Pro Ultra Plus has two slots for the 10ml containers and each container matches a specific pod. Look for small numbers or labels on the vape. Align the container with its slot and push it down until you hear a click. Do not force it and if it does not click, turn it around and try again. 

The container must sit flush with the vape, remember no gaps. Once both containers click in, they lock automatically. This step is critical since a loose container leaks or fails to feed liquid to the coil. Double-check both sides.

Step Three – Attach the Prefilled Pods

Now take the two 2ml prefilled pods, you will see that each pod contains a mesh coil. Remove any bungs from the pod bottoms. Look at the magnetic connection points on the vape. Line up the pod with the correct side and press down firmly until it snaps into place. You will feel a magnetic pull. 

Do the same for the second pod and ensure both pods sit straight. If a pod feels loose, remove it and reattach it. A weak connection stops the draw-activated system from working. Hence, you will inhale and get nothing.

Step Four – Flip the Kit Upside Down

This step is easy to skip, but do not skip it. Turn the whole vape upside down. Keep it flipped for about two to three minutes. Why? The liquid inside the 10ml containers needs time to flow into the 2ml pods. Gravity helps saturate the mesh coil. 

If you start vaping right away, the coil stays dry. A dry coil burns fast and that burnt taste never goes away. So be patient and set a timer if you need to. After three minutes, flip it back right side up. Now the coil is wet and ready.

Step Five – Check the Smart LED Display

The vape has a smart LED display. Turn the vape on by pressing the fire button five times quickly. Some models activate as soon as you attach the pods. Check the screen, it shows battery level and liquid status. A full battery icon means you have power. If the screen stays blank, charge the vape using the Type-C port. Do not use a fast phone charger, instead, use a standard 5V charger. The display also tells you when the auto-refill containers are empty. Learn to read it now before you start vaping.

Step Six – Take Your First Puff

Do not inhale hard, take a slow, gentle puff. The draw-activated system detects your breath and heats the coil automatically. You should get smooth vapour with good flavour. If nothing comes out, check the pod connection again. 

If you get a burnt taste, the coil was not saturated enough. Replace that pod with a new one and repeat the flipping step. A proper first puff tastes clean and matches the flavour you chose. For example, Blue Razz Cherry should taste sweet and tangy, not smoky.

How to Switch Between Two Flavours

The twist mouthpiece is a key feature, you can rotate it left or right. Each position connects to a different pod. One side might give you Blueberry Raspberry, while the other side gives you Fresh Mint. 

You can switch any time, even in the middle of a puff. This works because the vape holds two separate pods and containers. No mixing of flavours happens. Also, clean your mouthpiece weekly with a dry cloth since residue buildup changes the taste.

Common First-Time Mistakes

Many new users make the same errors. 

First, they forget to remove the bungs and second, they do not flip the vape upside down. Third, they use a fast charger and damage the battery. Fourth, they inhale too hard on the first puff, which pulls liquid into the mouth. 

Fifth, they ignore the LED display and run the battery dead. Avoid these five problems and your Hayati Pro Ultra Plus works fine. If you do get a leak, store the vape upright. Remember that heat causes leaks, so keep it away from radiators or direct sun.

How to Replace Pods Later?

After weeks of use, the pods run out. Do not throw away the whole vape, just buy replacement pods from Vapes Market Wholesale. To remove an old pod, pull it gently upward. 

The magnetic connection releases easily. Insert a new pod the same way as step three, then flip the vape upside down again for three minutes. The new coil needs saturation just like the first time. Old containers can also be replaced so pull out the empty 10ml container and click in a full one. That is it.

Troubleshooting Quick Fixes

No vapour? Check the pod connection. Weak flavour? Let the pod sit longer after flipping. Leaking liquid? Store the vape upright and avoid heat. Burnt taste? Replace the pod because the coil is done. Display not working? Charge the battery for 30 minutes. Most problems come from user error, not a broken vape. The Hayati Pro Ultra Plus is built well. Follow the steps above and you avoid 90 percent of issues.

Conclusion

Setting up the Hayati Pro Ultra Plus box of 5 is very easy if you follow the steps. Remove all bungs, stickers first and insert the two 10ml refill containers until you hear a click. 

Moreover, just attach the two prefilled pods firmly and flip the vape upside down for three minutes to saturate the coils. Check the smart display for battery level. 

Then take a slow, gentle puff. Do not rush the flipping step since a rushed setup gives burnt taste and weak vapour. A proper setup gives clean flavour and the full 25000 puffs. Furthermore, always buy genuine replacement pods from Vapes Market Wholesale.